Water Care & Cleaning

  • Softub Spa Foil Cleaner

    Ideal for removing contamination, staining and dirt from the inside of the pool. Easy to use with the special Ultra Mitt cleaning glove.

    Properties:

    • Contents: 1 l
    • Liquid
    • For edge and foil cleaning
    • Dissolves stubborn stains and dirt
  • Softub Spa Defoamer

    Bubble Ex acts immediately against the build-up of foam in your whirlpool, which can be caused by soap residues or other leftover impurities. If foam starts to accumulate, add one or two squirts to the bubbling water.
  • Softub Spa Lime Stabiliser

    Prevents lime and iron deposits in the pool. Already existing deposits are broken down. It further protects the filter from lime scale and corrosion damage inside the pipe system and heat exchangers. Softub Calcit is a liquid hardness stabilizer to prevent limescale precipitation and deposits. With hard water in particular, there is a higher of limescale precipitation as well as clouding and colouring of the water. Lime and metal ions are normally dissolved in the water. However, if the water hardness is too high, they get deposited on the inner lining of the whirlpool and inside the filter. Softub Calcit will lower the hardness of the water, thus preventing precipitations and deposits. This contributes significantly to the water maintenance of your pool. Ideal pH value: 7.2 - 7.6 Ideal alkalinity value: 80 - 120 mg / l
  • Softub Spa pH Increaser

    Effective water care including disinfecting it, requires an optimal pH value between 7.0 and 7.4. If the pH value in the water is too low, it can cause irritation to the skin and the eyes, as well as corrosion of metal elements and foil wrinkling. Admitted disinfectants cannot develop their full effect if the pH value is set incorrectly. Softub pH plus reliably helps you to adjust the pH value.
    • Ideal pH value: 7.0 - 7.4
    • Ideal alkalinity value: 80 - 120 mg / l
    The following dosage indications are average values which you may have to adjust slightly to your own measured values. Use an appropriate pH tester (AquaChek TruTest test strips) or 3 in 1 test strips to measure the pH value.
  • Softub pH Minus

    Effective water care including disinfecting it, requires an optimal pH value between 7.0 and 7.4. If the pH value in the water is too low, it can cause irritation to the skin and the eyes, as well as corrosion of metal elements and foil wrinkling. Admitted disinfectants cannot develop their full effect if the pH value is set incorrectly. Softub pH plus reliably helps you to adjust the pH value.
    • Ideal pH value: 7.0 – 7.4
    • Ideal alkalinity value: 80 – 120 mg / l
    The following dosage indications are average values which you may have to adjust slightly to your measured values. Use an appropriate pH tester (AquaChek TruTest test strips) or 3 in 1 test strips to measure the pH value.
  • Softub Oxisan

    Small dirt particles, germs and bacteria can be found in the whirlpool due to regular bathing and the environment. Softub Oxisan removes these dirt particles and is used for basic disinfection in combination with Softub Alginex and thus makes a decisive contribution to the water care of your pool. Alternatively, you can also use Softub Oxisan to disinfect children's paddling pools.  
  • Softub Chlorisan

    Softub Clorisan is a highly effective and quick-dissolving disinfectant for water care and works reliably against bacteria, germs and fungi in bathwater. It also helps to break down organic turbidity and any other further impurities.
    • Ideal pH value: 7.2 - 7.6
    • Ideal chlorine value: 0.3 - 0.8 mg / l
    Make sure that the pH and chlorine levels in your bath water are consistent and in the ideal range. The following dosage details are recorded as average values that you may have to adjust accordingly to your own measured values. Use an appropriate pH tester (AquaChek TruTest test strips) or 3 in 1 test strips to measure the pH value.
  • Softub Spa Clean Tablets

    The AquaFinesse Spa Clean tablet is used for thorough pool cleaning. It removes slime, dirt, limescale and stubborn deposits from the pipe and pump system.
  • Angebot!
    Filter Set Softub mit Filtertabletten
    Select options This product has multiple variants. The options may be chosen on the product page / Details

    Softub Filterkit – special tip to save money

    Original price was: CHF 129.00.Current price is: CHF 119.00.

    Softub Filterkit

    Softub Filter with 12 cleaning tablets
  • Softub Filter Cleaner

    For a perfect result, place the filter in a bucket of warm water for up to 3 hours and add a filter cleaning rod. Before use, rinse and clean the filter quickly with clean water. Contents: 20 cleaning rods    
  • Softub Filter Cleaner Small

    In order to enjoy your Softub whirlpool to the fullest, it is important to keep the filter as clean as possible. We recommend cleaning your filter at least once a month.  The cleaning tabs disinfect your filter and easily removes persistent staining and dirt marks. Contents: 6 cleaning tabs
  • Softub Cleaning Granules

    Disinfects the water and ensures that it remains nice and clean. Due to the low depot effect, the chlorine content of the water is reduced to a minimum. A measuring spoon is included in the package to measure the dosage correctly and accurately.
Go to Top